Getting Started with phoneME Feature Software (MR4)
This guide contains the following sections:
* Downloading phoneME Feature Software Source Code
* Before You Begin
* Setting Up Your Build Environment
* Building the JavaCall Porting Layer
* Building a PCSL Reference Port
* Building a CLDC Reference Port
* Building a phoneME Feature Software Reference Port
Introduction
This guide contains information for building and running the phoneME™ Feature software, an optimized Java™ Platform, Micro Edition stack based on Milestone Release 4 (MR4) of the phoneME Feature software project.
This guide allows you to take the following general steps:
* Set up and configure the build environment for your build platforms
* Build a default version of the JavaCall™ porting layer, PCSL libraries, CLDC, and phoneME Feature software binaries.
* Run the phoneME Feature software on your default platform.
* Find additional information about phoneME Feature software.
Note: This document is part of the MR4 release of phoneME Feature software. The contents are subject to change at any time, based on community input and ongoing development.
Build Requirements
When building the phoneME Feature software, the machine where you setup your build environment and carry out the build instructions is called your build platform. The build platform is the machine where source code is installed, the compilers are run, and executable code is built. This executable code is then installed and run on a target platform.
The phoneME Feature software supports the following build platforms:
* Windows x86
The phoneME Feature software supports the following target platforms:
* Windows x86 (emulation mode only)
Note: The phoneME Feature software also supports building on Linux for the ARM target platform. For more information on building for this platform (the Texas Instruments P2SAMPLE64-V6 board), see the Sun Java Wireless Client Software Build Guide.
Requirements for Building on a Windows x86 Platform
A Windows x86 target platform must meet the following requirements:
* Windows XP
* JDK™ version 1.6.x
* Microsoft Visual Studio 2005
* Cyg4Me version 1.1 (a version of Cygwin for building Java ME technology. Cyg4Me contains GNU Make 3.79.1.)
The following software is optional, depending on which optional packages you may want to build:
* Microsoft DirectX Software Development Kit (needed for Multimedia)
* Apple QuickTime Software Development Kit (needed for Multimedia)
* Java Card™ Development Kit, version 2.2.1 (needed for Security and Trust Services)
* Doxygen version 1.4.1 (used to build API documentation)
For more information on acquiring and installing Windows x86 build platform tools, see Setting Up the Windows x86 Build Environment. For more information on building optional package software, see Sun Java Wireless Client Software Build Guide.
Commercial Documentation
This guide provides only the minimal information needed to set up, build, and run the phoneME Feature software quickly, using only default settings for each implementation.
For additional information on any topic presented in this document, see the Sun Java Wireless Client Software Build Guide.
NOTE: The Sun Java Wireless Client Software Build Guide makes use of build scripts provided with the book. To get access to the build scripts, and for additional information about other phoneME Feature software topics, including porting, multitasking, using Adaptive User Interface Technology, and more, see the commercial documentation set.
分享到:
相关推荐
要毕业了,这是自己在学习过程中写的文档,仅供参考。文档中参考了书籍和网络资料,没能全部注明。 email: jinfuz@163.com
phoneme feature vm Architecture and Design Guide Sun Java™ Wireless Client Software 2.2 Java Platform, Micro Edition
一些关于end points detection和phoneme segmentation方法的papers
phoneme_advanced-mr2交叉编译,CVM移植ARM交叉编译
收集自Sun官方的开源项目phoneME,J2ME游戏编程时你会用到,你可以由此进一步探讨JavaME在Java底层的实现,可能对新手有些难度。
sun 提供的移動式虛擬機器,有支援 awt gui
Recurrent neural networks (RNNs) are a powerful model for sequential data. End-to-end training methods such as ...phoneme recognition benchmark, which to our knowledge is the best recorded score.
PhoneMe软件设计文档宣贯.pdf
phoneME-android:开源Java ME应用程序平台
安装 npm install phoneme-sequencer用法 var sequencer = require('phoneme-sequencer');var seq = sequencer.completeSequence( { base: ['START', 'L'] // Does not have to include 'START' or 'END' boundary: ...
phoneme_seequence 运行“ barkeet_sequence”指令 块设计: 2 x序列/序列-1.psyexp(每个块〜6分钟)2 x序列/序列-2.psyexp(每个块〜6分钟)1 x sequence-lexical_decision / sequence-1_LD.psyexp(每个块〜2...
npm install word-phoneme-map 用法 在使用地图之前的某个时间,您需要调用setUpDatabase来设置数据库,如下所示: var setUpDatabase = require('word-phoneme-map').setUpDatabase; setUpDatabase( { db...
基于Phoneme类的多模型方法,用于与文本无关的短话说话者识别
音素到音素(G2P) 音素到音素的相关材料集合 讲解 使用CMUSphinx工具提供的开源G2P构建语音词典的教程 工具 可训练的音素到音素转换器 您可以从上面的链接中获取原始源代码,但是自上一版本于2016年5月发布以来,...
利用SAPI 5.0进行音素分解图片说明。
自相关虽然能够判断清/浊音,并估计浊音的基音周期,但是其运算量很大,用乘法运算所需时间较长。为了避免乘法,采用短时平均幅度差函数(AMDF),验证AMDF与自相关有类似的作用,即平均幅度差函数能够代替自相关...
将英语字母和数字转为对应的音素,原文地址见 http://www.cs.cmu.edu/afs/cs/project/ai-repository/ai/areas/speech/systems/eng2phon/
Speech recognition using stochastic phonemic segment model based on phoneme segmentation Speech Recognition Using Stochastic Phonemic Segment Model Based on Phoneme Segmentation Chieko Furuichi, ...
This paper introduces WaveNet, a deep neural network for generating raw audio ... We also show that it can be employed as a discriminative model, returning promising results for phoneme recognition.
recognition (ASR), grapheme-to-phoneme (G2P), etc. In this paper, we propose a novel attention mechanism that has local and monotonic properties. Various ways to control those properties are also ...